com

petcock

quality replacement petcock for maico plastic tanks, fuel right hand exit from lever. comes complete with mounting screws.

$16.00    p/n  pet-1-1

petcock

quality replacement petcock for maico plastic tanks, rear exit from lever. comes complete with mounting screws. replaces original maico part number #6509.

$16.00    p/n  MAI-6509

tank strap

mounts under tank & pulls it into the rubber tank cushions for proper securing of tank. fits 80-83 models. replaces original maico part number #6511.

$3.00     p/n  mai-6511 (105 mm)

$3.00     P/N  MAI-6511 (120 mm)

gas cap

quality replacement for the original maico cap. complete with hose and gasket. fits maico plastic tanks 80-86 models. part number ga-cap-01 replaces original maico part number #6515. part number ga-01 replaces original maico part number #6516.

$16.00   p/n  MAI-6515 (complete with gasket)

$6.00     p/n  MAI-6516 (gasket only)

cable guide

a must have for those who don't want to endo. this cable guide bolts to the front number plate. helps keep the brake cable in alignment. complete with mounting hardware. available in black only. replaces original maico part number #6247.

$7.00     p/n  MAI-6247

ims/rage racing pro pegs

made exclusively for rage racing. these wide pegs offer the best grip available. manufactured by world famous ims, this unique product is sure to give quality performance without compromise. 17-4 cast stainless, heat-treated construction. designed to be a direct bolt on replacement. COMES WITH NEW MOUNTING HARDWARE.  fits 81-86 models. replaces original maico part number #6731 & #6735.

$105.00   p/n  MAI-6731

foot peg return springs

manufactured TO ORIGINAL SPECIFICATIONS. fits all 81-84 models. replaces original maico part number #6739 & #6740.

$5.00     p/n  MAI-6739 (left side)

$5.00     p/n  MAI-6740 (right side)

foot peg extender

manufactured by works connection. welds to the stock peg and extends each end a quarter of an inch, increasing the stock platform area a half an inch in size. stock peg width; one inch. fits 75-86 models.

$29.00    p/n  peg-w-01

frame insulation

the smallest details make all the difference. fits 81-82 models. replaces original maico part number #6759.

$2.00     p/n  MAI-6759 (2 pieces, placement under the tank on the frame).

$2.00     p/n  MAI-6759[2] (placement under the seat on the frame).

seat cover

these stock style covers are manufactured by mxm. a standard for quality and fit. fits 77-83 models.

$65.00    p/n  sc-77-01 (77-80 smooth)

$65.00    p/n  sc-81-01 (81-82 smooth)

gripper seat cover

These gripper seat covers are manufactured by rage racing. fabricated with a fine mesh gripper pattern. these covers work great if your looking for better positioning. 

$59.00    p/n  sc-77-79-g (77-79 seats)

$59.00    p/n  sc-81-g-b (81-82 seats)

OUT OF STOCK

$59.00    p/n  sc-85-g-b (85-86 seats)

seat foam

fabricated with dense firmness for comfort & control. fits 77-80 & 81-83 models. replaces original maico part number #5194, #6526, & #6724.

$65.00    p/n  fo-74-01 (72-74)

$65.00    p/n  fo-77-01 (77-80)

$65.00    p/n  fo-81-01 (81-83)

manufactured by rage racing. fits stock and reproduced seat pans. complete with mounting hardware. fits 81-84 models. replaces original maico part number #6722.

$15.00    p/n  MAI-6722

manufactured by rage racing. a stronger more resilient design that fits stock and reproduced seat pans. complete with mounting hardware. fits 81-84 models. replaces original maico part number #6721.

$20.00    p/n  MAI-6721

fabricated from high-density plastic. fits 72-83 models. part number ba-77-01 replaces original maico part number #5193. part number ba-81-01 replaces original maico part number #6720.

$45.00    p/n  ba-72-01 (72-76)

$45.00    p/n  MAI-5193 (77-80)

$45.00    p/n  MAI-6720 (81-83)

aluminum swingarm

manufactured by novation racing. fabricated from 6061 aircraft aluminum, heat treated to t-6. original geometry is retained for maico's legendary handling. anodized colors available: clear and gold. fits 81 models.

ideal for panel and number plates. anodized in gold color. sizes available: 16 mm, 19 mm, and 22 mm. *when ordering please note size and quantity.*

$3.25     p/n  size & quantity

ideal drilled washers

replacement steel washers for under bar mounts. sold in pairs.

$4.00     p/n  bw-01  

titanium 6a14v. diameters available: 6 mm, 8 mm, and 10 mm. lengths available: 8 mm-120 mm in 5 mm increments. hex head bolts. sold separately.

$10.00    p/n  6x60

$12.00    p/n  8x120

$16.00    p/n  10x120

 RACE STUFF     TRACKS     PARTS     CONTACT US     SOFT GOODS     PICS     OTHER INFO     LINK